Tapered thread mandrel on a 2.35mm shank. To be used with the Mini Rubber Silicone Cylinders, or Bullet shaped polishers and the EVEFLEX Technik Unmounted Rubber Cylinder Polishers. The dimensions are specific for use with these polishers and other similar taper mandrels may cause the polisher to split or fly off whilst using.
Ensure you have approximately 15mm of mandrel protruding from your collet for good working performance. If you are using these in a hobby rotary tool please ensure you have a 2.3mm collet or an adjustable chuck (Dremel Multi Chuck if using a Dremel)
- Diameter head: 3mm tapers to a point of 1.7mm
- Shank: 2.35mm or 3/32"