16mm Tungsten Carbide Burr Cylinder Without End Cut
- Available in either Single Cut or Double Cut (Diamond Cut)
- 16mm diameter
- 25mm cutting length
- 6mm Shank (1/4")
These cylinder shaped tungsten carbide burrs are to be used for easy removal of material, carving and defining. Use the burr at an angle to make v-cuts. Use with your rotary tool, flexible shaft or die grinder. Cutting speed should not exceed 35,000 RPM.
Choose Single Cut (one flute) for use with stainless steel, hardened steel, copper, cast iron, and ferrous metals. Use for heavy stock removal, milling, deburring and cleaning.
Choose Double cut for use on non-ferrous metals, aluminium, soft steel and also for all non-metal materials such as plastics and hard wood. Use for medium-light stock removal, deburring, finishing and cleaning. Will leave a smooth finish.
Tungsten Carbide Cutting Burr.
- Shape: Cylinder, without end cut
- Single Cut and Double Cut (Diamond Cut)
- Head Diameter: 16mm
- Cutting length: 25mm
- Overall length: 60mm
- Shank: 6mm (1/4")
Questions & Answers
Ask a question using the form below
Other questions and our answers
is the single cut or double cut carbide cylinder burr( i bought a 16mm single cut )the best for steel
Single cut carbide burrs are best used on stainless steel and hardened steel and will remove material quickly. Double cut will see you through many applications. They tend to be used on ferrous and non-ferrous metals, soft steel, aluminium, wood and plastics. A double cut burr will leave a smoother finish than single cut due to producing smaller chips as they cut away the material. Use for medium-light stock removal, deburring, finishing and cleaning.
I hope this helps, but please ask if you have any further questions.